N.Y. Comp. Codes R. & Regs. tit. 9 § 6060.4

Current through Register Vol. 46, No. 50, December 11, 2024

Section 6060.4 - Gunsmith or Dealer in Firearms Registration Requirements

(a) Any gunsmith or any dealer in firearms that places a serial number on a firearm, rifle, shotgun, finished frame or receiver, or unfinished frame or receiver that comes into their possession, pursuant to the requirements of subdivision (2) of section 265.07 of the Penal Law, must register such firearm, rifle, shotgun, finished frame or receiver, or unfinished frame or receiver with the division, in a form and manner prescribed by the division.

(b) Each gunsmith or dealer in firearms shall, in the form provided for by section 6060.5 of this Part, with respect to each such firearm, rifle, shotgun, finished frame or receiver, or unfinished frame or receiver that is serialized in accordance with paragraph (a) of subdivision (2) of section 265.07 of the Penal Law, submit or cause to be submitted the following:

(1) The serial number placed on firearm, rifle, shotgun, finished frame or receiver, or unfinished frame or receiver;

(2) the date the serial number was placed;

(3) a description of the firearm, rifle, shotgun, finished frame or receiver, or unfinished frame or receiver type;

(4) the name of the individual from whom the gunsmith or dealer in firearms took possession of the firearm, rifle, shotgun, finished frame or receiver, or unfinished frame of receiver;

(5) the contact information for such individual identified in paragraph (4) of this subdivision, including but not limited to, physical address, mailing address, phone number, and email address; and

(6) if such individual identified in paragraph (4) of this subdivision possesses a firearms license, the license number, type, and issuing county.

N.Y. Comp. Codes R. & Regs. Tit. 9 § 6060.4

Adopted New York State Register October 23, 2024/Volume XLVI, Issue 43, eff. 10/23/2024