N.Y. Comp. Codes R. & Regs. tit. 17 § 3B.19
INSERT the following paragraphs:
Standard:
03A Transverse lines shall be used where parking spaces are marked on a roadway which does not have standard centerline or lane markings.
Option:
03B On roadways which have standard centerline or lane markings, the parking lane may be indicated by a dotted line consisting of uniform line segments 4 feet in length separated by uniform gaps approximately 20 feet long.
Guidance:
03C Where peak-hour parking prohibitions permit the use of the parking lane as a travel lane, the parking lane should be at least 10 feet wide.
Option:
03D An edge line may be used to separate the travel lanes from the parking lanes.
Standard:
03E Angle parking sections, where marked, shall be indicated by parallel lines defining the individual parking stalls. Such lines shall extend into the roadway for a distance of between 17 to 21 feet.
Option:
03F The ends may be connected by a continuous longitudinal line.
Standard:
03G Stall width in angled parking sections shall allow sufficient space between parked vehicles to permit opening of vehicle doors.
N.Y. Comp. Codes R. & Regs. Tit. 17 § 3B.19