Statutes, codes, and regulations
New York Codes, Rules and Regulations
Title 17 - DEPARTMENT OF TRANSPORTATIONChapter V - New York State Supplement To The National Manual On Uniform Traffic Control Devices For Streets And Highways-2009 EditionPart 2 - Signs
Chapter 2E - Guide Signs - Freeways And Expressways
Section 2E.31 - Interchange Exit Numbering

N.Y. Comp. Codes R. & Regs. tit. 17 § 2E.31

Download
PDF
Current through Register Vol. 46, No. 25, June 18, 2024
Section 2E.31 - Interchange Exit Numbering

DELETE Paragraph 09.

INSERT the following paragraphs:

Support:

04A New York currently uses the consecutive exit numbering method for interchanges. New York expects to eventually adopt a reference location sign exit numbering system, and also discontinue the use of cardinal directions suffixes as part of the exit number in favor of a suffix letter (e.g., A, B, C).

Standard:

06A An E5-1bP exit number plaque shall be used only in conjunction with the E5- 1 Exit Gore sign (see Section 2E.37 ).

Guidance:

07A Exit number plaques should be designed in accordance with the MUTCD, but with square bottom corners and no bottom border. The text on the plaque should be centered vertically within the green area of the plaque face.

07B An exit number plaque should be positioned such that its right or left bottom edge is offset from the edge of the sign it supplements by a distance equal to the sign's corner radius.

N.Y. Comp. Codes R. & Regs. Tit. 17 § 2E.31