Statutes, codes, and regulations
New York Codes, Rules and Regulations
Title 17 - DEPARTMENT OF TRANSPORTATIONChapter V - New York State Supplement To The National Manual On Uniform Traffic Control Devices For Streets And Highways-2009 EditionPart 2 - Signs
Chapter 2D - Guide Signs - Conventional Roads
Section 2D.34 - Confirming or Reassurance Assemblies

N.Y. Comp. Codes R. & Regs. tit. 17 § 2D.34

Download
PDF
Current through Register Vol. 46, No. 25, June 18, 2024
Section 2D.34 - Confirming or Reassurance Assemblies

DELETE Paragraph 02.

INSERT the following paragraphs:

Standard:

01A A Confirming assembly shall be used on a numbered route beyond each intersection (or interchange) at which the route turns. A confirming assembly shall be used on a numbered route beyond each intersection (or interchange) where it is intersected or joined by another numbered route.

Guidance:

01B A Confirming assembly should be installed 25 to 200 feet beyond the far shoulder or curb line of the intersected highway.

04A Reassurance assemblies should be placed near the state boundary.

Support:

04B In urban areas, Reassurance assemblies may be necessary at two-block intervals, while in rural districts, spacing of one and one-half miles is more appropriate.

N.Y. Comp. Codes R. & Regs. Tit. 17 § 2D.34