Current through Register Vol. 46, No. 45, November 2, 2024
Section 400.4 - Referee tests(a) In a referee test, a representative of the commission will seal the meter or meter device involved, and will notify the utility within 24 hours that such meter or device has been sealed.(b) In a referee test, the seals for the meter or the meter device involved shall be opened only in the presence of a representative of the commission. The meter or meter device shall be tested under the direction of a representative of the commission.(c) When, in a referee test, the percentage registration of a meter is found to be more than 102 percent, no charge shall be made for such test. If, however, as a result of such test, the percentage registration of the meter is found to be 102 percent or less, a charge shall be made to the customer by the utility based on the following schedule: Type of Meter | Capacity or Size | Fee |
Condensate | 3000 lbs. per hr. or less | $ 25.00 |
Condensate | Over 3000 lbs. per hr. | 50.00 |
Area | 1 in. | 25.00 |
Area | 11/2 in. | 25.00 |
Area | 2 in. | 50.00 |
Area | 3 in. | 75.00 |
Area | 4 in. | 100.00 |
Area | 6 in. | 150.00 |
Area | 8 in. | 300.00 |
Velocity | 1 in. | 25.00 |
Velocity | 2 in. | 25.00 |
Velocity | 3 in. | 50.00 |
Velocity | 4 in. | 50.00 |
Head | All | 100.00 |
N.Y. Comp. Codes R. & Regs. Tit. 16 § 400.4