N.Y. Comp. Codes R. & Regs. tit. 16 § 255.359

Current through Register Vol. 46, No. 41, October 9, 2024

Section 255.359 - Customer meter installations: operating pressure

(a) A meter may not be used at a pressure that is more than 67 percent of the manufacturer's shell test pressure.

(b) Each newly installed meter manufactured after November 12, 1970, must have been tested to a minimum of 10 psig (69 kPa).

(c) A rebuilt or repaired tinned steel case meter may not be used at a pressure that is more than 50 percent of the pressure used to test the meter after rebuilding or repairing.

N.Y. Comp. Codes R. & Regs. Tit. 16 § 255.359