N.Y. Comp. Codes R. & Regs. tit. 16 § 93.6

Current through Register Vol. 46, No. 25, June 18, 2024

Section 93.6 - Form of application

The following shall be included in the application addressed to the commission:

(a) name and address of applicant;

(b) name and address of manufacturer;

(c) manufacturer's type of designation, together with a brief description of general and physical characteristics, including ratings, size, shape, adjustments and the type service to which the meter may be applied;

(d) statement of intent of sponsoring entity to use, if approved;

(e) a statement by the manufacturer or sponsoring entity certifying that the device under consideration has been tested to, and meets, all the requirements of this Part;

(f) a statement by the manufacturer, sponsoring entity or testing laboratory, certifying that:

(1) all tests have been conducted by personnel who have thorough practical and theoretical knowledge of the meters and adequate training in making precision measurements;

(2) the test equipment employed in these tests conforms to the applicable requirements specified in Standards and Standardizing Equipment, of the latest version of ANSI C12; and

(3) the accuracy of the test equipment has been established by comparison with standards whose accuracy is traceable to the National Institute of Standards and Technology.

N.Y. Comp. Codes R. & Regs. Tit. 16 § 93.6