N.Y. Comp. Codes R. & Regs. tit. 16 § 10.3

Current through Register Vol. 46, No. 45, November 2, 2024

Section 10.3 - Other information

(a) The standards referred to in this subdivision are published by and available from the American Society of Mechanical Engineers, 22 Law Drive, Box 2900, Fairfield, NJ 07007-2900. They are available for inspection and copying at the Public Service Commission's Office, Empire State Plaza, Building 3, Albany, NY 12223-1350. The regulations referenced in this Title are:

(1) ASME/ANSI B31.4, Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids (1992 edition);

(2) ASME/ANSI B31.8, Gas Transmission and Distribution Piping Systems (2007 edition);

(3) ASME/ANSI B31.1, Power Piping (1995 edition);

(4)ASME Boiler and Pressure Vessel Code, Section VIII, Pressure Vessels, Division 1 and Division 2 (2007 edition);

(5)ASME Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualifications (2007 edition);

(6) ASME/ANSI B16.1, Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (2005 edition);

(7) ASME/ANSI B16.5, Pipe Flanges and Flanged Fittings (2003 edition);

(8) ASME/ANSI B31G, Manual for Determining the Remaining Strength of Corroded Pipelines; (1991 edition) (Reaffirmed; 2004);

(9) ASME/ANSI B31,8s-2004 (Supplement to B31.8), Managing System Integrity of Gas Pipelines, (2004); and

(10)ASME Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers (2007 edition).

(b) The standards referred to in this subdivision are published by and available from the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269. They are available for inspection and copying at the Public Service Commission's Office, Empire State Plaza, Building 3, Albany, NY 12223-1350. The standards referenced in this Title are:

(1) NFPA 30, Flammable and Combustible Liquids Code (2008 edition);

(2) NFPA 54, National Fuel Gas Code (1996 edition);

(3) NFPA 58, Liquefied Petroleum Gas Code (2004 edition);

(4) ANSI/NFPA 59, Standard for the Storage and Handling of Liquefied Petroleum Gases at Utility Gas Plants (2004 edition);

(5) NFPA 59A, Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) (2001 edition); and

(6) NFPA 70, National Electrical Code (2008 edition).

(c) The standards referred to in this subdivision are published by and available from the American Petroleum Institute, 1220 L Street, Northwest, Washington, DC 20005 (www.api.org). They are available for inspection and copying at the Public Service Commission's Office, Empire State Plaza, Building 3, Albany, NY 12223-1350. The standards referenced in this Title are:

(1) API Specification 5L/ISO 3183, Specification for Line Pipe (44th edition, 2007), Includes Errata (January 2009) and Addendum (February 2009);

(2) API Recommended Practice 5L1, Recommended Practice for Railroad Transportation of Line Pipe, (6th edition, 2002);

(3) API Recommended Practice 5LW, Transportation of Line Pipe on Barges and Marine Vessels, (2nd edition, December 1996, effective March 1, 1997);

(4) API Specification 6D/ISO 14313, Specification for Pipeline Valves (23rd edition and errata 1, 2 and 3, [2009]);

(5) [Reserved]

(6) API Standard 1104, Welding of Pipelines and Related Facilities (20th edition, October 2005, errata/addendum, [July 2007] and errata 2 [2008]);

(7) API Recommended Practice 1162, Public Awareness Programs for Pipeline Operators (First edition [December 2003]); and

(8) API Recommended Practice 1165, Recommended Practice for Pipeline SCADA Displays (API RP 1165) (1st edition, January 2007).

(d) The standards referred to in this subdivision are published by and available from the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428. They are available for inspection and copying at the Public Service Commission's Office, Empire State Plaza, Building 3, Albany, NY 12223-1350. The standards referenced in this Title are:

(1) ASTM Specification A53/A53M, Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated Welded and Seamless (A53/A53M-07);

(2) ASTM Specification A106/A106M, Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service (A106/A106M-08);

(3) ASTM Specification A671, Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures (A671-06);

(4) ASTM Specification A672, Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures (A672-08);

(5) ASTM Specification A691, Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures (A691-98) (Reapproved 2007);

(6) ASTM Specification A333/A333M, Standard Specification for Seamless and Welded Steel Pipe for Low Temperature Service (A333/A333M-05);

(7) ASTM Specification A372/A372M, Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels (A372/A372M-03) (2008);

(8) ASTM Specification A381, Standard Specification for Metal-Arc-Welded Steel Pipe for use with High-Pressure Transmission Systems (A381-96) (Reapproved 2005);

(9) ASTM Specification B88, Standard Specification for Seamless Copper Water Tube (B88-96);

(10) ASTM Specification D638, Standard Test Method for Tensile Properties of Plastic (D638-03);

(11) ASTM Specification D2513, Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings (D2513-99 except for marking requirements, D2513-87);

(12) ASTM Specification D2517, Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings (D2517-2000); and

(13) ASTM Specification F1055, Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing (F1055-98).

(e) The standards referred to in this subdivision are published by and available from the Manufacturers Standardization Society of the Valve and Fittings Industry, 127 Park Street, NE, Vienna, VA 22180. They are available for inspection and copying at the Public Service Commission's Office, Empire State Plaza, Building 3, Albany, NY 12223-1350. The standards referenced in this Title are:

(1) MSS SP-25, Standard Markings System for Valves, Fittings, Flanges and Unions (1998); and

(2) MSS SP-44, Steel Pipe Line Flanges (2006).

(f) The opinions referred to in this subdivision were authored by the Public Service Commission and are available for inspection and copying at the commission's office, Empire State Plaza, Building 3, Albany, NY 12223. The opinions referenced in this Title are:

(1) Op. No. 75-6, entitled Opinion and Order Establishing Rules and Regulations Pertaining to Underground Electric Transmission Facilities Not Subject to Article VII of the Public Service Law, issued March 26, 1975 in Cases 25352 and 25396, as amended by Op. No. 75-6(A), entitled Opinion and Order Granting in Part and Denying in Part Applications for Rehearing, issued August 1, 1975; and

(2) Op. No. 77-10, entitled Opinion and Order Determining Insulation Standards Applicable to Existing Dwellings Converting to Gas Space Heating, issued August 16, 1977 in Case 26286, as amended by Order Clarifying Insulation Standards Established in Opinion 77-10, issued November 2, 1977.

(g) The standards referred to in this subdivision are:

(1)American National Standard for Gas Displacement Meters (500 cubic feet per hour capacity and under) and designated as ANSI B109.1-1986;

(2)American National Standard for Diaphragm Type Gas Displacement Meters (over 500 cubic feet per hour capacity) and designated as ANSI B109.2-1986; and

(3)American National Standard for Rotary Type Gas Displacement Meters and designated as ANSI B109.3-1986.

(4)American Gas Association Report No. 3, Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Third Edition, Part 1 General Equations and Uncertainty Guidelines (1990), Part 2 Specification and Installation Requirements (1991), Part 3 Natural Gas Applications (1992), and Part 4 Background, Development, Implementation Procedure, and Subroutine Documentation for Empirical Flange-Tapped Discharge Coefficient Equation (1992).

(5) American Gas Association Pipeline Research Committee, Project PR-3-805, A Modified Criterion for Evaluating the Remaining Strength of Corroded Pipe, (December 22, 1989).

(6)American Gas Association Purging Principles and Practices, Third Edition, June 2001.

These standards are published by and available from the American Gas Association, 1515 Wilson Boulevard, Arlington, VA 22209. They are available for inspection and copying at the Public Service Commission's Office, Building 3, Empire State Plaza, Albany, NY 12223.

(h)

(1) The standards referred to in Part 503, section 503.1 of this Title are published by Health Research Inc., Health Education Services Division, P.O. Box 7126, Albany, NY 12224. They are available for inspection and copying at the Public Service Commission's Office, Empire State Plaza, Building 3, Albany, NY 12223. The standards referenced in this Title are: Recommended Standards for Water Works - Policies for the Review and Approval of Plans and Specifications for Public Water Supplies (1987 Edition).

(2) The standards referred to in Part 503, section 503.6 of this Title are published by the American Water Works Association, 6666 W. Quincy Avenue, Denver, CO 80235. They are available for inspection and copying at the Public Service Commission's Office, Empire State Plaza, Building 3, Albany, NY 12223. The standards referenced in this Title are: Manual M 17 - Installation, Field Testing and Maintenance of Fire Hydrants (1989 Edition).

(i) The standard referred to in this subdivision is published by and available from the NACE International, 1440 South Creek Drive, Houston, TX 77084-4906. It is available for inspection and copying at the Public Service Commission's Office, Empire State Plaza, Building 3, Albany, NY 12223-1350. The standard reference in this Title is:

(1) ANSI/NACE SP 0502-2008 Pipeline External Corrosion Direct Assessment Methodology, (2008).

(j) The standard referred to in this subdivision is published by and available from the Gas Technology Institute, 1700 S. Mount Prospect Road, Des Plaines, IL 60018. It is available for inspection and copying at the Public Service Commission's Office, Empire State Plaza, Building 3, Albany, NY 12223-1350. The standard referenced in this Title is:

(1) GRI 02-0057, Internal Corrosion Direct Assessment of Gas Transmission Pipelines- Methodology, (April 1, 2002).

(k) The standards referred to in this subdivision are published by and available from the Plastics Pipe Institute, Inc. (PPI), 1825 Connecticut Avenue, NW, Suite 680, Washington, DC 20009. They are available for inspection and copying at the Public Service Commission's Office, Empire State Plaza, Building 3, Albany, NY 12223-1350. The regulations referenced in this Title are:

(1) PPI TR-3/2008 "Policies and Procedures for Developing Hydrostatic Design Bases (HDB), Pressure Design Bases (PDB), and Minimum Required Strength (MRS) Ratings for Thermoplastic Piping Materials" Part E.2 only, Policy for Determining Long Term Strength (LTHS) by Temperature Interpolation (2008 edition).

N.Y. Comp. Codes R. & Regs. Tit. 16 § 10.3

Amended New York State Register December 9, 2015/Volume XXXVII, Issue 49, eff. 11/24/2015