TABLE A
CLAMP TYPE BRAKE CHAMBER DATA | ||||
TYPE | OUTSIDE DIAMETER | BRAKE ADJUSTMENT LIMIT | ||
in. | mm. | in. | mm. | |
6 | 4-1/2 | (114) | 1-1/4 | (32) |
9 | 5-1/4 | (133) | 1-3/8 | (35) |
12 | 5-11/16 | (145) | 1-3/8 | (35) |
16 | 6-3/8 | (162) | 1-3/4 | (45) |
20 | 6-25/32 | (172) | 1-3/4 | (45) |
24 | 7-7/32 | (184) | 1-3/4 | (45) |
30 | 8-3/32 | (206) | 2 | (51) |
36 | 9 | (229) | 2-1/4 | (57) |
LONG STROKE CLAMP TYPE BRAKE CHAMBER DATA | ||||
TYPE | OUTSIDE DIAMETER | BRAKE ADJUSTMENT LIMIT | ||
in. | mm. | in. | mm. | |
12 | 5-11/16 | (145) | 1-3/4 | (35) |
16 | 6-3/8 | (162) | 2.0 | (45) |
20 | 6-25/32 | (172) | 2.0 | (45) |
24 | 7-7/32 | (184) | 2.0 | (45) |
24* | 7-7/32 | (184) | 2-1/2 | (45) |
30 | 8-3/32 | (206) | 2-1/2 | (51) |
* For three-inch maximum stroke type 24 chambers. | ||||
NOTE: A brake found at the adjustment limit is not a violation. | ||||
BOLT TYPE BRAKE CHAMBER DATA | ||||
TYPE | OUTSIDE DIAMETER | BRAKE ADJUSTMENT LIMIT | ||
in. | mm. | in. | mm. | |
A | 6-15/16 | (176) | 1-3/8 | (35) |
B | 9-3/16 | (234) | 1-3/4 | (45) |
C | 8-1/16 | (205) | 1-3/4 | (45) |
D | 5-1/4 | (133) | 1-1/4 | (32) |
E | 6-3/16 | (157) | 13/8 | (35) |
F | 11 | (279) | 2-1/4 | (57) |
G | 9-7/8 | (251) | 2 | (51) |
NOTE: A brake found at the adjustment limit is not a violation. | ||||
ROTOCHAMBER DATA | ||||
TYPE | OUTSIDE DIAMETER | BRAKE ADJUSTMENT LIMIT | ||
in. | mm. | in. | mm. | |
9 | 4-9/32 | (109) | 1-1/2 | (38) |
12 | 4-13/16 | (122) | 1-1/2 | (38) |
16 | 5-13/32 | (138) | 2 | (51) |
20 | 5-15/16 | (151) | 2 | (51) |
24 | 6-13/32 | (163) | 2 | (51) |
30 | 7-1/16 | (180) | 2-1/4 | (57) |
36 | 7-5/8 | (194) | 23/4 | (70) |
50 | 8-7/8 | (226) | 3 | (76) |
NOTE: A brake found at the adjustment limit is not a violation. | ||||
DD2 & DD-3 BRAKE CHAMBER DATA | ||||
TYPE | OUTSIDE DIAMETER | BRAKE ADJUSTMENT LIMIT | ||
in. | mm. | in. | mm. | |
30 | 8-1/8 | (206) | 2-1/4 | (57) |
NOTE: This chamber has three air lines and is found on motor coaches. | ||||
NOTE: A brake found at the adjustment limit is not a violation. | ||||
WEDGE BRAKE DATA | ||||
The combined movement of both shoe lining scribe marks shall not exceed 1/8 inch (3.18 mm). |
N.Y. Comp. Codes R. & Regs. Tit. 15 § 79.29