N.Y. Comp. Codes R. & Regs. tit. 15 § 45.2

Current through Register Vol. 46, No. 50, December 11, 2024

Section 45.2 - Name and marking of red emergency reflector

The device must be given a distinctive name. The approved name shall be moulded or stamped on the device in letters at least three-sixteenths inches high so that it is readily legible. Any other letters or numbers than this distinctive name shall be in smaller letters.

N.Y. Comp. Codes R. & Regs. Tit. 15 § 45.2