N.Y. Comp. Codes R. & Regs. Tit. 12 §§ 14-9.18

Current through Register Vol. 46, No. 53, December 31, 2024

Section 14-9.18 - Gage cocks

(a) Each boiler shall have three or more gage cocks located within the visible length of the water glass, except when the boiler has two water glasses located on the same horizontal lines.

(b) Boilers not over 36 inches in diameter in which the heating surface does not exceed 100 square feet need have but two gage cocks.

(c) The gage cock connections shall not be less than one-half inch pipe size.

N.Y. Comp. Codes R. & Regs. Tit. 12 §§ 14-9.18