TABLE 1-BOTTLED WATER SAMPLING REQUIREMENTS
Number of Samples | ||||
Contaminant | Maximum Contaminant Levels | Frequency of Samples | Source Water | Finished Product 1 |
Microbiological: | See Table 1A | |||
-Heterotrophic | ||||
-Microrganisms | * | |||
-Total Coliform | Less than 1 organism per 100 ml3 | |||
Radiological: | ||||
-Gross Alpha Particle Activity (including Radium 226 but excluding Radon and Uranium) | 15 picocuries per liter | Yearly | 1 6 | 16 |
-Combined Radium 226 and Radium 228 | 5 picocuries per liter | Yearly | 16 | 16 |
-Beta particle and photon activity from manmade radio-nuclides | 4 millirems per year | Yearly | 16 | 16 |
Physical: | Yearly | 1 | 1 | |
-Turbidity | 5 units | |||
-Color | 15 units | |||
-Odor | Threshold Odor No. 3 | |||
Inorganic chemical: | Yearly 4 | 1 56 | 156 | |
Arsenic (As) | 0.05 | |||
Barium (Ba) | 1.0 | |||
Cadmium (Cd) | 0.01 | |||
Chloride (Cl) | 250.0 | |||
Chromium (Cr) | 0.05 | |||
Copper (Cu) | 1.0 | |||
Fluoride (F) | 2.2 | |||
Iron (Fe) | 0.3 | |||
Lead (Pb) | 0.05 | |||
Manganese (Mn) | 0.3 | |||
Mercury (Hg) | 0.002 | |||
Nitrate (N) | 10.0 | |||
Selenium (Se) | 0.01 | |||
Silver (Ag) | 0.05 | |||
Sulfate (S04) | 250.0 | |||
Zinc (Zn) | 5.0 | |||
Alkalinity | 2 | |||
Corrosivity | *2 | |||
Hardness | * 2 | |||
pH | * 2 | |||
Sodium (Na) | * 2 | |||
Total dissolved solids | * 2 |
*
No maximum contaminant level established.
Maximum Contaminant Levels in Milligrams/Liter | Number of Samples | |||
Contaminant | Frequency of Samples | Source Water | Finished Product | |
Organic Chemical: | ||||
Pesticides/Herbicides | Yearly4 | 156 | 156 | |
Endrin | 0.0002 | |||
Lindane | 0.004 | |||
Methoxychlor | 0.050 | |||
Toxaphene | 0.005 | |||
2,4-D | 0.050 | |||
2,4,5-TP (Silvex) | 0.01 | |||
Trihalomethanes | Yearly | 156 | ||
Total Trihalomethane | 0.10 | |||
(TTHM) | ||||
General Organic Chemicals | ||||
Principal Organic Contaminant (See Table 1B for listing of monitored contaminants.) | 0.005 | Yearly4 | 156 | 156 |
Unspecified Organic Contaminants | 0.050 | None specified | ||
Total of all POCs and UOCs | 0.10 | None specified | ||
Vinyl Chloride | 0.002 | Yearly | 156 | 156 |
1 Samples shall be collected and analyzed for each production line and product type. If more than one container size is bottled at the facility, a plan to rotate sampling of contaner sizes shall be submitted to and approved by the department.
2 No maximum contaminant level established.
3 No positive total coliform result.
4 All monitoring samples shall be collected and analyzed in the first quarter of the calendar year, unless otherwise specified by the State.
5 Every third year, beginning in 1992, or in the first full calendar year following certification, four quarterly monitoring samples shall be collected and analyzed.
6 The owner or operator of a bottled water facility shall require the approved laboratory performing the anlayses to send a copy of the laboratory report directly to the department. The owner or operator of a bottled water facility shall submit with the next monthly monitoring report following receipt of the laboratory report a letter to the department, certifying that the aforementioned laboratory report accurately represents the quality of the described bottled water product and that the bottled water product complies with the organic, inorganic, radiological and other water quality standards in this Subpart.
TABLE 1-A-MICROBIOLOGICAL SAMPLING FREQUENCY
Minimum Number of Samples | ||||||
Total gallons produced per month | Uncarbonated bottled water | Carbonated bottled water | Bulk water | |||
Finished product per week | Source water per month | Finished product per month | Source water per month | Finished product per month | Source water per month | |
1 to 39,999 | 1 | 1 | 1 | 1 | 1 | 1 |
40,000 to 79,999 | 2 | 2 | 1 | 1 | 1 | 1 |
80,000 to 299,999 | 3 | 2 | 1 | 1 | 1 | 1 |
300,000 to 699,999 | 4 | 3 | 1 | 1 | 1 | 1 |
700,000 and more | 5 | 3 | 1 | 1 | 1 | 1 |
TABLE 1-B-PRINCIPAL ORGANIC CHEMICALS
benzene
bromobenzene
bromochloromethane
bromomethane
n-butylbenzene
sec-butylbenzene
tert-butylbenzene
carbon tetrachloride
chlorobenzene
chloroethane
chloromethane
2-chlorotolune
4-chlorotoluene
dibromomethane
1,2-dichlorobenzene
1,3-dichlorobenzne
1,4-dichlorobenzene
dichlorodifluoromethane
1,1-dichloroethane
1,2-dichloroethane
1,1-dichloroethane
cis-l,2-dichloroethene
trans-1,2-dichloroethene
1,2-dichloropropane
1,3-dichloropropane
2,2-dichloropropane
1,1-dichloropropene
cis-l,3-dichloropropene
trans-1,3,-dichloropropene
ethylbenzene
hexachlorobutadiene
isopropylbenzene
p-isopropyltoluene
methylene chloride
n-propylbenezene
styrene
1,1,1,2-tetrachloroethane
1,1,2,2-tetrachloroethane
tetrachloroethene
toluene
1,2,3-trichlorobenzene
1,2,4-trichlorobenzene
1,1,1-trichloroethane
1,1,2-trichloroethane
trichloroethene
trichlorofluoromethane
1,2,3-trichloropropane
1,2,4-trimethylbenzene
1,3,5-trimethylbenzene
m-xylene
o-xylene
p-xylene
Footnotes
* No maximum contaminant level established.
N.Y. Comp. Codes R. & Regs. Tit. 10 §§ 5-6.11