Statutes, codes, and regulations
New Mexico Administrative Code
Title 21 - AGRICULTURE AND RANCHINGChapter 16 - AGRICULTURAL WEIGHTS AND MEASURES
Part 5 - BONDING AND REGISTRATION OF SERVICE TECHNICIANS AND SERVICE ESTABLISHMENTS FOR COMMERCIAL WEIGHING OR MEASURING DEVICES
Section 21.16.5.15 - STANDARDS AND TESTING EQUIPMENT

N.M. Admin. Code § 21.16.5.15

Download
PDF
Current through Register Vol. 35, No. 21, November 5, 2024
Section 21.16.5.15 - STANDARDS AND TESTING EQUIPMENT
A. A service technician or service establishment must possess or have available sufficient certified test standards to test in accordance with NIST handbook 44 requirements the class of devices for which registration is applied. Prior to registration, and at least annually thereafter, all standards and testing equipment used by the registered service technician or registered service establishment shall be examined by the department or another approved laboratory and a calibration certificate issued for all standards and testing equipment found to be acceptable. A copy of the calibration certificate for all standards and testing equipment used by the registered service technician or registered service establishment shall accompany the registration application.
B. A registered service technician or registered service establishment shall not use in installing, servicing, repairing, or reconditioning a commercial device any standards or testing equipment that has not been certified.

N.M. Admin. Code § 21.16.5.15

7/1/97; 21.16.5.15 NMAC - Rn, 21 NMAC 16.5.15, 01/31/07