N.M. Admin. Code § 20.9.3.11

Current through Register Vol. 35, No. 23, December 10, 2024

Section 20.9.3.11 - ADDITIONAL PERMIT APPLICATION REQUIREMENTS FOR PROCESSING FACILITIES AND FOR RECYCLING FACILITIES THAT ACCEPT SOLID WASTE THAT ACCOMPANIES THE RECYCLABLE MATERIAL

A. Any person seeking a permit for a processing facility or for a recycling facility that accepts solid waste shall submit the following information in addition to that required under 20.9.3.8 NMAC:

(1) a description of the survey and analysis process used to determine the characteristics of all solid waste expected to be accepted or processed;

(2) plans and elevations, drawn to scale, of all structures used for processing, storage, alternate storage, and disposal of waste materials;

(3) a process description of the sampling capability and locations designed into the facility so the process stream can be safely sampled and analyzed;

(4) a description of the methods to be employed for the containment or removal of residues and spills in a manner that protects the public health, welfare, safety and the environment; and

(5) an operation and maintenance manual that addresses all of the operating requirements.

B. Any person seeking a permit for a processing facility that will process special waste shall, in addition to the requirements of this section, submit the following additional information:

(1) the proposed location and method for storage or processing of liquid or solid residues and end products produced by operation of the facility;

(2) the process for separation, storage and disposal of waste generated by the process, including the temporary storage of wastes;

(3) the minimum and maximum volumes of the types of material or solid waste to be stored prior to processing or disposal, and the minimum and maximum time that material or waste will be stored;

(4) facility plans and elevations, drawn to scale, and specifications including:

(a) equipment layout;

(b) the most recent full size United States geological survey topographic map of the area, showing the waste facility boundary, the property boundary, and existing utilities and structures within 500 feet of the property boundary;

(c) the location of electric power transmission and distribution lines, pipelines, railroads and public and private roads within 300 feet of the proposed facility;

(d) the processing unit, with loading area and residue removal;

(e) all conveyors, ramps and other devices used to move material through the facility;

(f) control room and equipment; and

(g) pollution control equipment;

(5) an operations and maintenance manual that includes:

(a) current policies and procedures;

(b) the operating requirements for the various stages of processing; and

(c) all information that would enable supervisory and operating personnel, and persons evaluating the operation of the facility, to determine the sequence of operation, plans, diagrams, policies, procedures and legal requirements which must be followed for orderly and successful operations;

(6) a description of the facility operation which includes:

(a) a sequential description of the major components used for the processing of the solid waste starting from its delivery at the facility and continuing through the treatment and loading operations;

(b) procedures for facility start-up, and scheduled and unscheduled shut downs;

(c) a description of potential safety hazards and methods of control, including, but not limited to, arrangements to detect explosion potential and equipment installed to minimize the impact of explosion; and

(d) a description of personnel safety equipment and protective gear, including, but not limited to, showers, eye wash, fire extinguishers, hoses, hard hats, safety goggles, hearing protection, and proposed personnel hygiene facilities;

(7) an operations plan that includes all plant systems complete with process flow and instrumentation diagrams and heat and material balances; and

(8) residue testing methods and procedures.

N.M. Admin. Code § 20.9.3.11

20.9.3.11 NMAC - Rp, 20 NMAC 9.1.II.204 NMAC, 08/02/07