N.M. Code R. § 20.6.2.5102

Current through Register Vol. 35, No. 11, June 11, 2024

Section 20.6.2.5102 - PRE-CONSTRUCTION REQUIREMENTS FOR CLASS I WELLS AND CLASS III WELLS

A. Discharge permit requirement for Class I wells.

(1) Prior to construction of a Class I well or conversion of an existing well to a Class I well, an approved discharge permit is required that incorporates the requirements of 20.6.2.5000 through 20.6.2.5399 NMAC, except Subsection C of 20.6.2.5210 NMAC. As a condition of discharge permit issuance, the operation of the Class I well under the discharge permit will not be authorized until the secretary has:

(a) reviewed the information submitted for his consideration pursuant to Subsection C of 20.6.2.5210 NMAC; and

(b) determined that the information submitted demonstrates that the operation will be in compliance with this part and the discharge permit.

(2) If conditions encountered during construction represent a substantial change which could adversely impact ground water quality from those anticipated in the discharge permit, the secretary shall require a discharge permit modification or may terminate the discharge permit pursuant to Subsection I of 20.6.2.5101 NMAC, and the secretary shall publish public notice and allow for comments and hearing in accordance with 20.6.2.3108 NMAC.

B. Notification requirement for Class III wells.

(1) The discharger shall notify the secretary in writing prior to the commencement of drilling or construction of wells which are expected to be used for in situ extraction, unless the discharger has previously received a discharge permit or project discharge permit for the Class III well operation.

(a) Any person proposing to drill or construct a new Class III well or well field, or convert an existing well to a Class III well, shall file plans, specifications and pertinent documents regarding such construction or conversion, with the ground water quality bureau of the environment department.

(b) Plans, specifications, and pertinent documents required by this section, if pertaining to carbon dioxide facilities, or facilities for the exploration, production, refinement or pipeline transmission of oil and natural gas, shall be filed instead with the oil conservation division of the energy, minerals and natural resources department.

(c) Plans, specifications and pertinent documents required to be filed under this section must be filed 90 days prior to the planned commencement of construction or conversion.

(d) The following plans, specifications and pertinent documents shall be provided with the notification:

(i) information required in Subsection C of 20.6.2.3106 NMAC;

(ii) a map showing the Class III wells which are to be constructed; the map must also show, in so far as is known or is reasonably available from the public records, the number, name, and location of all producing wells, injection wells, abandoned wells, dry holes, surface bodies of water, springs, mines (surface and subsurface), quarries, water wells and other pertinent surface features, including residences and roads, that are within the expected area of review (20.6.2.5202 NMAC) of the Class III well or well field perimeter;

(iii) maps and cross-sections indicating the general vertical and lateral limits of all ground water having 10,000 mg/l or less TDS within one mile of the site, the position of such ground water within this area relative to the injection formation, and the direction of water movement, where known, in each zone of ground water which may be affected by the proposed injection operation;

(iv) maps and cross-sections detailing the geology and geologic structure of the local area, including faults, if known or suspected;

(v) the proposed formation testing program to obtain an analysis or description, whichever the secretary requires, of the chemical, physical, and radiological characteristics of, and other information on, the receiving formation;

(vi) the proposed stimulation program;

(vii) the proposed injection procedure;

(viii) schematic or other appropriate drawings of the surface and subsurface construction details of the well;

(ix) proposed construction procedures, including a cementing and casing program, logging procedures, deviation checks, and a drilling, testing, and coring program;

(x) information, as described in Paragraph (17) of Subsection B of 20.6.2.5210 NMAC, showing the ability of the discharger to undertake measures necessary to prevent ground water contamination; and

(xi) a plugging and abandonment plan showing that the requirements of Subsections B, C and D of 20.6.2.5209 NMAC will be met.

(2) Prior to construction, the discharger shall have received written notice from the secretary that the information submitted under item 10 of Subparagraph (d) of Paragraph (1) of Subsection B of 20.6.2.5102 NMAC is acceptable. Within 30 days of submission of the above information the secretary shall notify the discharger that the information submitted is acceptable or unacceptable.

(3) Prior to construction, the secretary shall review said plans, specifications and pertinent documents and shall comment upon their adequacy of design for the intended purpose and their compliance with pertinent sections of this part. Review of plans, specifications and pertinent documents shall be based on the criteria contained in 20.6.2.5205, Subsection E of 20.6.2.5209, and Subparagraph (d) of Paragraph (1) of Subsection B of 20.6.2.5102 NMAC.

(4) Within 30 days of receipt, the secretary shall issue public notice, consistent with Subsection B of 20.6.2.3108 NMAC, that notification was submitted pursuant to Subsection B of 20.6.2.5102 NMAC. The secretary shall allow a period of at least 30 days during which comments may be submitted. The public notice shall include:

(a) name and address of the proposed discharger;

(b) location of the discharge;

(c) brief description of the proposed activities;

(d) statement of the public comment period; and

(e) address and telephone number at which interested persons may obtain further information.

(5) The secretary shall comment in writing upon the plans and specifications within 60 days of their receipt by the secretary.

(6) Within 30 days after completion, the discharger shall submit written notice to the secretary that the construction or conversion was completed in accordance with submitted plans and specifications, or shall submit as-built plans detailing changes from the originally submitted plans and specifications.

(7) In the event a discharge permit application is not submitted or approved, all wells which may cause ground water contamination shall be plugged and abandoned by the applicant pursuant to the plugging and abandonment plan submitted in the notification; these measures shall be consistent with any comments made by the secretary in his review. If the wells are not to be permanently abandoned and the discharger demonstrates that plugging at this time is unnecessary to prevent ground water contamination, plugging pursuant to the notification is not required. Financial responsibility established pursuant to 20.6.2.5000 through 20.6.2.5299 NMAC will remain in effect until the discharger permanently abandons and plugs the wells in accordance with the plugging and abandonment plan.

N.M. Code R. § 20.6.2.5102

9-20-82, 12-24-87, 12-1-95; 20.6.2.5102 NMAC - Rn, 20 NMAC 6.2.V.5102, 1-15-01; A, 12-1-01, Amended by New Mexico Register, Volume XXVI, Issue 15, August 14, 2015, eff. 8/31/2015, Amended by New Mexico Register, Volume XXIX, Issue 23, December 11, 2018, eff. 12/21/2018