N.M. Code R. § 20.2.74.303
Current through Register Vol. 35, No. 11, June 11, 2024
Section 20.2.74.303 - AMBIENT IMPACT REQUIREMENTSA. The requirements of this section shall apply to each pollutant emitted by a new major stationary source or major modification in amounts equal to or greater than those in Table 2 of this Part (20.2.74.502 NMAC). For PM10, the source will only be required to perform ambient impact analysis for PM10 when the source has the potential to emit significant amounts of PM10 (Table 2, 20.2.74.502 NMAC).B. The allowable emission increases from the proposed source or modification, including secondary emissions, in conjunction with all other applicable emissions increases or reductions, including secondary emissions, shall not cause or contribute to air pollution in violation of: (1) any national ambient air quality standard in any location; or(2) any applicable maximum allowable increase as shown in Table 4 of this Part (20.2.74.504 NMAC) over the baseline concentrations in any area;(3) the owner or operator of the proposed major stationary source or major modification shall demonstrate that neither Paragraph (1) nor Paragraph (2) of 20.2.74.303 NMAC will occur.N.M. Code R. § 20.2.74.303
07/20/95; 20.2.74.303 NMAC - Rn, 20 NMAC 2.74.303, 10/31/02; A, 6/3/11; A, 8/18/14