Current through Register Vol. 35, No. 11, June 11, 2024
Section 20.2.16.7 - DEFINITIONSIn addition to the terms defined in 20.2.2 NMAC (Definitions), as used in this Part:
A. "Construction" means fabrication, erection or installation of an affected facility.B. "Commenced" means that an owner or operator has undertaken a continuous program of construction or that an owner or operator has entered into a binding agreement or contractual obligation to undertake and complete within a reasonable time a continuous program of construction.C. "Existing nonferrous smelter" means nonferrous smelter that was fully constructed and operational prior to September 1, 1971.D. "Modification" means a physical change or change in the manner of operation which increases the amount of any air contaminant emitted by the nonferrous smelter or which results in the emission of any air contaminant not previously emitted.E. "New nonferrous smelter" means nonferrous smelter the construction or modification of which was commenced after September 1, 1971.F. "Part" means an air quality control regulation under Title 20, Chapter 2 of the New Mexico Administrative Code, unless otherwise noted; as adopted or amended by the Board.G. "Standard conditions" means temperature of 68 degrees Fahrenheit and pressure of 29.92 inches of mercury.11/30/95; 20.2.16.7 NMAC - Rn, 20 NMAC 2.16.107 10/31/02