N.M. Code R. § 20.2.15.108
Current through Register Vol. 35, No. 11, June 11, 2024
Section 20.2.15.108 - EMISSION LIMITATIONSA. The owner or operator of pumice, mica or perlite process equipment shall not permit, cause, suffer or allow particulate matter emissions to the atmosphere from a stack or stacks in excess of the maximum amounts specified in the following table: Process Rate Pounds per Hour | Maximum Stack Emission Rate Pounds per Hour |
10,000 | 10 |
20,000 | 15 |
30,000 | 22 |
40,000 | 28 |
50,000 | 31 |
100,000 | 33 |
200,000 | 37 |
300,000 | 40 |
400,000 | 43 |
500,000 | 47 |
600,000 & above | 50 |
B. When the process rate is between any two consecutive process rates in the table, the maximum stack emission rate is determined by interpolation. Where an operation has more than one stack, the maximum stack emission rate applies to the total of the emissions from all stacks.N.M. Code R. § 20.2.15.108
11/30/95; 20.2.15.108 NMAC - Rn, 20 NMAC 2.15.108 10/31/02