Part 14 - PARTICULATE EMISSIONS FROM COAL BURNING EQUIPMENT
- Section 20.2.14.1 - ISSUING AGENCY
- Section 20.2.14.2 - SCOPE
- Section 20.2.14.3 - STATUTORY AUTHORITY
- Section 20.2.14.4 - DURATION
- Section 20.2.14.5 - EFFECTIVE DATE
- Section 20.2.14.6 - OBJECTIVE
- Section 20.2.14.7 - DEFINITIONS
- Section 20.2.14.8 - AMENDMENT AND SUPERSESSION OF PRIOR REGULATIONS
- Section 20.2.14.9 - DOCUMENTS
- Section 20.2.14.10 to 20.2.14.199 - RESERVED
- Section 20.2.14.200 - Emission Limitations - Equipment Less Than or Equal to 250 MBTU/HOUR HEAT CAPACITY
- Section 20.2.14.201 - Emission Limitations - New Equipment Greater Than 250M BTU/HOUR HEAT CAPACITY
- Section 20.2.14.202 - Emission Limitations - Existing Equipment Greater Than 250M BTU/Hour and Less Than 5000M BTU/HOUR HEAT CAPACITY
- Section 20.2.14.203 - Emission Limitations-Existing Equipment Equal to or Greater Than 5000M BTU/HOUR
- Section 20.2.14.204 - METHOD FOR DETERMINING EMISSIONS LIMITATIONS
- Section 20.2.14.205 - Petition for Test Method of Emission Limitation for Existing Equipment - Heat Capacity Equal to or Greater than 5000M BTU/HOUR
- Section 20.2.14.206 to 20.2.14.299 - RESERVED
- Section 20.2.14.300 - PROCEDURE I, INTRODUCTION
- Section 20.2.14.301 - PROCEDURE I, METHOD
- Section 20.2.14.302 - SAMPLING TRAIN FOR FINE PARTICULATE MATTER, PROCEDURE I
- Section 20.2.14.303 - ARRANGEMENT OF IMPACTION PLATES AND FILTER HOLDER IN THE ANDERSON IMPACTOR, PROCEDURE I
- Section 20.2.14.304 - TEMPERATURE CORRECTION FOR AERODYNAMIC SIZE OF PARTICLES CAPTURED IN THE ANDERSON IMPACTOR, PROCEDURE I
- Section 20.2.14.305 - AERODYNAMIC DIAMETER VS. FLOWRATE THROUGH PLATE 44 OF THE ANDERSON IMPACTOR (50% IMPACTION EFFICIENCY), PROCEDURE I
- Section 20.2.14.306 to 20.2.14.399 - RESERVED
- Section 20.2.14.400 - PROCEDURE II, INTRODUCTION
- Section 20.2.14.401 - PROCEDURE II, METHOD
- Section 20.2.14.402 - SAMPLING TRAIN FOR FINE PARTICULATE MATTER, PROCEDURE II
- Section 20.2.14.403 - ARRANGEMENT OF IMPACTION PLATES AND FILTER IN THE ANDERSON IMPACTOR, PROCEDURE II
- Section 20.2.14.404 - SAMPLE GRAPH OF TEMPERATURE CORRECTION FOR AERODYNAMIC SIZE OF PARTICLES CAPTURED IN THE ANDERSON IMPACTOR, PROCEDURE II
- Section 20.2.14.405 - SAMPLE GRAPH OF AERODYNAMIC DIAMETER VS. FLOWRATE THROUGH PLATE #4 OF THE ANDERSON IMPACTOR (50% IMPACTION EFFICIENCY), PROCEDURE II