N.M. Code R. § 20.11.69.25

Current through Register Vol. 35, No. 12, June 25, 2024

Section 20.11.69.25 - UPSET CONDITION

A. The provisions of 20.11.49 NMAC shall not apply to any PWD.

B. Whenever the temperature requirements of Sections 15 or 17 of 20.11.69 NMAC or any emission limit in 20.11.69.13 NMAC for which compliance is based on continuous emissions monitoring, is exceeded, the operator shall take the following actions:

(1) cut off waste charging to the combustion unit;

(2) notify the department verbally of the exceedence within four hours of its occurrence or prior to twelve noon of the next business day should the exceedence occur during non-business hours;

(3) note in the operating record the time and date of the exceedence, when shutdown began, and when shutdown was complete;

(4) identify and correct the cause of the upset condition before resuming operation of the unit; and

(5) note in the operating record the corrective action taken and the time and date of startup.

N.M. Code R. § 20.11.69.25

5/13/92; 20.11.69.25 NMAC - Rn, 20 NMAC 11.69.II.14, 10/1/02; A, 10/13/09