Current through Register Vol. 36, No. 1, January 14, 2025
Section 19.15.40.14 - PRINTED FORMS, AND FEESA. Printed forms as prescribed by the division shall be used for application for license, licenses, receipts, approvals, disapproval's, installation records, inspection reports and any other purposes for which the bureau may consider standardized forms necessary for expediency.B. An administrative penalty may be assessed to anyone found to be making intentional false reports or for failure to file any written report or form as required by law.C. Printed forms listed below by number or name are hereby adopted and their use for the purpose stated. (1)FORM 1. Records of Installation, Test or Modification. $20.00. To be used to record the following. (a) Installation of LP gas containers. Containers of 239#WC or less shall be exempt from this requirement.(b) Installation of piping and appliances. Form 1 shall be prepared at time work is performed and shall be submitted to the LP gas bureau by close of business the following business day.(2)Retail Cylinder Exchange Installation Registration Form. $20.00. Fee shall be submitted with required plans for proposed location of retail cylinder exchange installation. Reinspection of cylinder exchange installations $20.00(3)LP Gas Installations at Special Events Registration Form. $15.00. To be used for installations at special events with containers of 239#WC or less.(4)LP Gas Visual Cargo Tank and Equipment Inspection Form. $45.00.(a) (Shall not be assessed more than one time in each 12 month period).(b) Re-inspection of cargo tank and equipment and additional charge for re-inspection. $45.00.(c) Licensee must obtain form prior to inspection of vehicle or placing a new vehicle in service. Bureau inspector will complete form upon inspection. Corrections after inspection will require a correction form and may require re-inspection. To expedite inspections, vehicle licensee will be notified by the LP gas bureau that vehicle annual inspection is due during the first month of the inspection quarter.(5)Plant/Dispenser Inspection Form. $45.00.(a) (Shall not be assessed more than one time in each 12 month period).(b) Re-inspection of bulk storage and additional charge for re-inspection. $45.00.(c) Licensee must obtain form prior to inspection of plant or placing a new dispenser in service. LP gas bureau inspector will complete form upon inspection. Corrections after inspection will require a correction form and may require re-inspection. To expedite inspections, dispenser licensee will be notified by the bureau that dispenser annual inspection is due during the first month of the inspection quarter.(6)Correction Inspection Form. LP gas bureau inspector will issue form when correction is needed and note the code, statute or rule and regulation section number that was in violation. Bureau inspector may lock and seal filler valve until correction is completed. After correction, licensee will sign correction form, attach appropriate new inspection form (listed above), and return forms, seal and filler valve lock to inspector for re-inspection.(7)Certificate of Insurance. To be submitted by all licensees to the LP gas bureau.(8)Form 1 first re-inspection fee shall be $20.00.(9)Form 1 second re-inspection fee shall be $75.00.N.M. Admin. Code § 19.15.40.14
19.15.40.14 NMAC - Rp, 19.15.40.14 NMAC, 2-1-06, Amended by New Mexico Register, Volume XXIX, Issue 10, May 29, 2018, eff. 7/1/2018