N.M. Admin. Code § 16.8.3.11

Current through Register Vol. 35, No. 17, September 10, 2024

Section 16.8.3.11 - CANNABIS FINISHED PRODUCT LABELING IN CANNABIS CONSUMPTION AREAS

Packaging and labeling exemptions and minimum requirements. A licensed cannabis consumption area may sell cannabis products to a consumer, qualified patient, or reciprocal patient without packaging and labeling under the following conditions:

A. the consumer, qualified patient, or reciprocal patient intends to consume cannabis product on the licensed premises of the cannabis consumption area and will store unused product on the premises as required by cannabis consumption area licensing requirements in 16.8.2 NMAC;

B. at the time of transfer of the cannabis finished product to a consumer, the licensed cannabis consumption area provides the consumer with a written statement of the potency of the cannabis product's THC or Total THC, and CBD, which shall be expressed as a percentage for inhaled cannabis finished products, and expressed in milligrams for edible cannabis finished products and topical cannabis finished products. If CBD is not detected in the inhaled cannabis finished product, then CBD potency is not required;

C. the licensed cannabis consumption area maintains and makes available to the consumer, qualified patient, or reciprocal patient upon request written or electronic documentation reflecting all relevant information required in cannabis consumption area licensing requirements 16.8.2 NMAC; and

D. for multiple-serving edible cannabis finished product, the licensed cannabis consumption area at the time of transfer to the consumer, qualified patient, or reciprocal patient shall provide a measurement device necessary for the purchaser to achieve accurate measurements of each serving in increments equal to or less than 10 milligrams of Total THC per serving.

N.M. Admin. Code § 16.8.3.11

Adopted by New Mexico Register, Volume XXXII, Issue 01, January 11, 2022, eff. 4/1/2022