N.M. Admin. Code § 14.5.3.12

Current through Register Vol. 35, No. 17, September 10, 2024

Section 14.5.3.12 - PRODUCT STANDARDS AND APPROVALS

A.Product approval. Construction or installations shall not be approved as code compliant unless the products and materials used meet the standards set forth in the New Mexico construction codes or as approved by the specific TBC pursuant to Subsection D of 14.5.1.11 NMAC.

B.Procedures for determining compliance. The appropriate TBC has the authority to establish the procedures necessary to determine whether products and materials meet the standards set forth in the New Mexico construction codes.

C.Marking systems. Marking/labeling of a listing agency (accredited conformity assessment body) for equipment or materials shall identify products that comply with the standards set forth in the applicable New Mexico construction codes.

D.Approval of listing agencies. A listing agency shall not be approved for certifying, marking/labeling products for use in New Mexico that does not comply with the American national standards institute (ANSI) or other accredited certifying agencies as recommended by the appropriate TBC and approved by the commission.

N.M. Admin. Code § 14.5.3.12

14.5.3.12 NMAC - Rp, 14.5.3.8 NMAC & 14 NMAC 9.2.I.105, 7-1-04, Adopted by New Mexico Register, Volume XXVII, Issue 21, November 15, 2016, eff. 11/15/2016, Adopted by New Mexico Register, Volume XXXIII, Issue 03, February 8, 2022, eff. 3/10/2022