N.J. Admin. Code § 7:18-5.3

Current through Register Vol. 56, No. 23, December 2, 2024

Section 7:18-5.3 - Required use of DSAMs

(a) In performing chemical analysis of a regulatory sample (including, without limitation, analysis of a PT sample by a laboratory that is applying to become certified), a laboratory shall use only:

1. A DSAM from the applicable Category listed in 7:18-5.1(a) for which the laboratory is certified or is applying to become certified; or

2. An applicable ATP approved by the Department pursuant to 7:18-2.20 for the laboratory and, if applicable, for the facility in question.

(b) The requirements of (a) above do not apply to the analysis of a non-regulatory sample, if the requirements of 7:18-2.22(b) are satisfied.

(c) If a laboratory applies for certification for an analytical method under the Clean Air Program that requires other analytical methods to be performed as part of the analysis, the laboratory shall also apply for certification for all of the required methods.

N.J. Admin. Code § 7:18-5.3

Amended by 47 N.J.R. 782(a), effective 4/20/2015.