N.J. Admin. Code § 5:14A-13.13

Current through Register Vol. 57, No. 1, January 6, 2025

Section 5:14A-13.13 - Assembly and disassembly

(a) A thorough check of the inflatable ride and its accessories shall be carried out by a qualified person before its use. This check shall ensure that all anchor points, anchor ropes, and anchor stakes or ballasts are undamaged and suitable for continued use.

(b) Illustrations and detailed instructions shall be provided for setting up an inflatable ride.

(c) Anchorage requirements:

1. Stakes or ballast shall be used at every anchorage point and shall be installed per manufacturer requirements;

2. Stakes with restraining hooks or collars at the top shall be used to prevent the attached rope from sliding up and releasing; and

3. Anchoring shall not create a tripping hazard.

(d) All tie-down ropes attached to the inflatable ride shall be fastened to a stake or anchorage. Any rope that becomes detached from the structure shall be replaced with ropes of at least equivalent breaking strength, and shall be attached with equivalent or greater attachment strength.

(e) During assembly, proper clearance on all sides and top of the inflatable ride shall be observed as per the manufacturer's requirements and N.J.A.C. 5:14A-9.14.

N.J. Admin. Code § 5:14A-13.13