N.J. Admin. Code § 18:23A-1.16

Current through Register Vol. 56, No. 23, December 2, 2024

Section 18:23A-1.16 - Rights-of-way and easements

(a) The rights-of-way and easements of all public utilities shall be shown with their widths and types (that is, private, sewer utility, etc.) set forth on the affected Detail Sheets. If the width is unknown, a scaled dimension shall be used.

(b) If the rights-of-way are owned in fee and are, therefore, assessable, they may be detailed in one of the following methods:

1. A right-of-way may be assigned a block number to apply to the entire length of such right-of-way in the municipality, assigning consecutive lot numbers to portions limited by roads, streets, etc., in which case the right of way shall be shown with a heavy solid block limit line (See Standards, Page S15).

2. Each portion of a right-of-way limited by roads, streets, etc., may be assigned a lot number applicable to the block in which it is located, in which case the right-of-way shall be shown with the regular type lot lines (See Standards, Page S15).

3. Each portion of a right-of-way limited by roads, streets, etc. may be assigned a separate block number in which case the right-of-way shall be shown with a heavy solid block limit line (See Standards, Page S14).

(c) If a right-of-way is not owned in fee, being an easement only, it shall be shown with a very short, thin-dashed line and shall not be assigned a lot number. The area included within the easement shall be included as part of the lot through which it runs (See Standards, Page S39).

(d) The name of the owner or user of all rights-of-way of easements shall be shown, such as Public Utility, Sewerage Authority, etc.

N.J. Admin. Code § 18:23A-1.16