N.J. Admin. Code § 16:47-4.41

Current through Register Vol. 56, No. 11, June 3, 2024

Section 16:47-4.41 - Lot consolidation or subdivision permits checklist

(a) Applications for lot consolidations or subdivisions shall be accompanied by two copies of detailed plans to a scale of one inch equals 30 feet (1=300 for metric) or one inch equals 50 feet (1=600 for metric). The Department may require additional copies of the plans. Plan sheet size shall not exceed 24 inches (594 millimeters) by 36 inches (841 millimeters).

(b) The following information shall be submitted for both the lot consolidation and subdivision applications:

1. Site location map (The Key map must reference at least two cross streets on each side of the property, milepost, north arrow and scale);

2. Zoning designation for lot;

3. Copy of tax map showing existing: block number, lot number and lot lines;

4. Topography, on the lot and its frontage;

5. Length of lot frontage along highway and frontage of next adjacent non-single-family residential lots;

6. Locations of all existing lot driveways;

7. Curbline openings;

8. Driveway width;

9. Driveway alignment with respect to the highway;

10. Edge clearance;

11. Corner clearance;

12. Driveway and island radii;

13. Number of existing units for residential use; rooms for hotels and motels; square footage for retail, office, and warehouse; or appropriate unit of measure for other land use;

14. Type of vehicles anticipated;

15. Percentage of traffic anticipated to use each access point on each lot;

16. Dimensions from the lot line to the edge of pavement;

17. Copies of transmittals of duplicate applications to the municipal clerk and county planning board; and

18. A copy of the deed or the preliminary subdivision approval.

N.J. Admin. Code § 16:47-4.41