Current through Register Vol. 56, No. 21, November 4, 2024
Section 15:3-3.8 - Computer output microfilm(a) Computer output microfilm (COM) must meet the requirements of ANSI/AIIM MS1-1996 as amended or supplemented, incorporated by reference herein.(b) For microfilming source documents or computer generated information (COM) on microfiche, the formats and reduction ratios prescribed in ANSI/AIIM MS5-1992 shall be used as specified for the size and quality of the documents being filmed.(c) Computer output microfilm (COM) generated images shall be the simplex mode described in ANSI/AIIM MS14-1996 as amended or supplemented, incorporated by reference herein, at an effective ratio of 1:24 or 1:48 depending upon the application.(d) ANSI/AIIM MS23-1998 as amended or supplemented, incorporated by reference herein, shall be followed for determining the appropriate reduction ratio and format for microfiche to meet image quality requirements.(e) Indices on computer-generated microforms shall follow the data on a roll of film or in the last frames of a single microfiche, or the last frames of the last fiche in a series pursuant to 15:3-3.6(b)2 i(3).N.J. Admin. Code § 15:3-3.8