N.J. Admin. Code § 14:6-4.1

Current through Register Vol. 56, No. 23, December 2, 2024

Section 14:6-4.1 - Testing of gas meters

(a) Each gas utility shall provide itself with equipment necessary for testing meters that are either in use or in inventory. Utilities may cooperate in arranging for such facilities.

(b) A bell type prover shall be set up permanently in the location where it is to be used. All provers will be calibrated according to ANSI B109, incorporated herein by reference, as amended and supplemented, and is available at www.ansi.org. Whenever a utility calibrates a prover, the calibration shall be witnessed and approved by the Board. Whenever a manufacturer calibrates a prover, the calibration shall be verified and approved by the Board.

(c) All gas utilities shall ensure that each prover is furnished an inspection and approval tag by the Board.

N.J. Admin. Code § 14:6-4.1

Amended by R.1991 d.456, effective 9/3/1991.
See: 23 N.J.R. 944(a), 23 N.J.R. 2652(a).
Bell-type provers calibrated to ANSI B109 required.
Amended by R.1996 d.411, effective 9/3/1996.
See: 28 N.J.R. 2830(a), 28 N.J.R. 4106(a).
Amended by R.2007 d.63, effective 2/20/2007.
See: 38 N.J.R. 3245(a), 39 N.J.R. 663(a).
Inserted designations (a) through (c); in (b) inserted ", incorporated herein by reference, as amended and supplemented, and is available at www.ansi.org"; and in (c), substituted "All gas utilities shall ensure that each" for "Each" and "is" for "will be".