N.J. Admin. Code § 13:62-17.6

Current through Register Vol. 56, No. 19, October 7, 2024

Section 13:62-17.6 - Seat belts

(a) All vehicles must have an approved three-inch, five-point harness that meets SFI 16.1, properly mounted to the frame.

(b) Shoulder harnesses should be mounted at shoulder height to a maximum of two inches above the shoulders.

(c) All components of the harness must have a manufacturer date stamp on them and cannot be over two years old.

(d) Ratchet strap harnesses that meet SFI Specification 16.1 are approved even though some may have a two-inch section of harness at the locking mechanism.

N.J. Admin. Code § 13:62-17.6

Adopted by 54 N.J.R. 1302(b), effective 7/5/2022