Whenever steel caps or hoods are required to protect padlocks, the steel cap or hood shall be constructed of not less than 1/4 inch steel and shall be designed to eliminate access to the hasp between the hood or cap and magazine. An extra 1/4 inch steel shall be required by the director when it is necessary to prevent the cutting of any part of the locking assembly.
N.H. Admin. Code § Saf-C 5013.02
(See Revision Note at Chapter heading for Saf-C 5000) #6055, eff 7-1-95, EXPIRED: 7-1-03
New. #8117, INTERIM, eff 7-14-04, EXPIRED: 1-10-05
New. #8261, eff 1-21-05; ss by #9765-A, eff 8-2-10