Section Saf-C 3244.16 - Tire and Wheels(a) A street rod shall be rejected if a tire has: (2) A cut, break or weather crack which is: a. In excess of one inch in any direction as measured on the outside of the tire; orb. Deep enough to reach the body cords;(3) Temporary repairs made with blowout patches or boots;(4) Any bumps, bulges or knots related to separation or partial failure of the tire structure;(5) Any portion of the ply or cord structure exposed through the tread; or(6) A portion of the tread completely worn, which is of sufficient size to affect the traction and stopping ability of the tire.(b) A street rod shall be rejected if the tread depth measured in a major tread groove nearest the center of the tire is less than 2/32 inch.(c) Pursuant to RSA 266:47, a street rod shall be rejected if it is equipped with one or more regrooved tires.(d) A street rod shall be rejected if: (1) Radial and bi-ply tires are on the same axle;(2) Different tire sizes are on the same axle, except for U.S. and metric sizes of compatible construction, dimensions and load capacity;(3) Tires are marked "for farm use only", "off highway use only" or "racing only";(4) Wheel bolts, studs or lugs are loose, missing or damaged; or(5) Any portion of the wheel is bent, cracked, re-welded, damaged or has elongated bolt holes that affects the safe operation of the street rod.N.H. Admin. Code § Saf-C 3244.16
(See Revision Notes at chapter heading Saf-C 3200) #8915, eff 6-22-07
Amended by Volume XXXVI Number 06, Filed February 11, 2016, Proposed by #11016, Effective 1/6/2016, Expires 1/6/2026.