Section Saf-C 1208.01 - Continuing Education Requirements(a) An applicant for recertification of a pre-engineered kitchen fixed fire extinguishing systems certificate shall provide proof of one of the following: (1) Current certificate of training from a manufacturer of pre-engineered kitchen fixed fire extinguishing systems or an agent that is listed by UL, FM or any other nationally recognized testing agency;(2) A certificate less than 3 years old, showing successful completion of the ICC/NAFED recertification program for pre-engineered kitchen fire extinguishing technicians;(3) Current successful completion of the NICET Special Hazards Suppression Systems Certificate, Level II or greater; or(4) Successful completion of a course or program approved by the department.(b) An applicant for recertification of a pre-engineered industrial fixed fire extinguishing systems certificate shall provide proof of one of the following: (1) Current certificate of training from a manufacturer of pre-engineered industrial fixed fire extinguishing systems or an agent that is listed by UL, FM or any other nationally recognized testing agency;(2) A certificate less than 3 years old, showing successful completion of the ICC/NAFED recertification program for industrial fire extinguishing technicians;(3) Current successful completion of the NICET Special Hazards Suppression Systems Certificate, Level II or greater; or(4) Successful completion of a course or program approved by the department.(c) An applicant for recertification of an engineered fixed fire extinguishing system certificate shall provide proof of one of the following: (1) Current certificate of training from a manufacturer of engineered fixed fire extinguishing systems or an agent that is recognized by UL, FM or any other nationally recognized testing agency;(2) Current successful completion of the NICET Special Hazards Suppression Systems Certificate, Level II or greater;(3) A certificate less than 3 years old, showing successful completion of the ICC/NAFED recertification program for engineered fire extinguishing technicians; or(4) Successful completion of a course or program approved by the department.(d) An applicant for recertification of a portable fire extinguisher fire protection technician certificate shall provide proof of one of the following: (1) Current certificate of training less than 3 years old from a manufacturer of portable fire extinguishers or an agent that is recognized by UL, FM or any other nationally recognized testing agency;(2) A certificate less than 3 years old, showing successful completion of the ICC/NAFED recertification program for portable fire extinguisher technicians;(3) A certificate less than 3 years old, showing successful completion of the Brooks Equipment company recertification program for portable fire extinguisher technicians; or(4) Successful completion of a course or program approved by the department.(e) An applicant for recertification for a fire alarm systems certificate shall provide proof of at least 6 hours of one of the following: (1) Current certificate of training from a manufacturer of fire alarm systems or an agent that is listed by UL, FM or any other nationally recognized testing agency; or(2) Successful completion of a course or program approved by the department.(f) An applicant for recertification for a fire sprinkler system technician certificate shall provide proof of one of the following: (1) For a limited fire sprinkler system technician certificate, at least 6 hours of continuing education in the field of fire sprinkler systems; or(2) For an unlimited fire sprinkler system technician certificate, at least 15 hours of continuing education in the field of fire sprinkler systems.N.H. Admin. Code § Saf-C 1208.01
(See Revision Note at chapter heading for Saf-C 1200) #9810-A, eff 11-6-10