Section Plc 313.34 - Substantially Similar Requirements for the Professions Regulated by the Mechanical Licensing Board For purposes of obtaining a license by endorsement in a profession regulated by the mechanical licensing board, the licensing jurisdiction shall use the same edition or later of the building code adopted for New Hampshire under RSA 155-A:1, IV and the same edition or later of the fire code adopted for New Hampshire under RSA 153:5, and the current requirements of the licensing jurisdiction shall be as follows:
(a) For a journeyman plumber: (1) Complete a state-approved apprenticeship program for journeyman plumbers that requires 4 years full-time or the equivalent and includes 560 hours of instruction; and(2) Pass a state-approved examination for journeyman plumbers;(b) For a master plumber: (1) Obtain the amount of experience as a journeyman plumber that is specified by the licensing jurisdiction; and(2) Pass a state-approved examination for master plumbers;(c) For a domestic appliance technician, complete state-approved training for domestic service technicians that includes a minimum of 1,000 hours of experience;(d) For a fuel gas installation technician, complete state-approved training for fuel gas installers that includes a minimum of 1,000 hours of experience;(e) For a fuel gas piping installer, complete state-approved training for fuel gas piping installers that includes a minimum of 1,000 hours of experience;(f) For a fuel gas service technician, complete state-approved training for fuel gas service technicians that includes a minimum of 2,000 hours of experience; and(g) For a hearth system installation and service technician, complete state-approved training for hearth system installation and service technicians that includes a minimum of 2,000 hours of experience.N.H. Admin. Code § Plc 313.34
Derived from Number 45, Filed November 9, 2023, Proposed by #13763, Effective 10/15/2023, Expires 4/12/2024.Amended by Number 24, Filed June 13, 2024, Proposed by #13954, Effective 5/3/2024, Expires 5/3/2034 (see Revision Note #1 at part heading for Plc 313).