Section Geo 307.03 - Licensed Professional Geologist Seal/Stamp(a) Upon receiving his or her license, the licensee shall acquire an impression type seal or rubber stamp of the design specified in Geo 307.03(b). This seal, signature of the licensee, and date shall be affixed on all papers or documents involving the practice of geology prepared by the licensee issued or filed for public record.(b) The seal shall consist of 2 concentric circles with the outer circle having a diameter of 1-5/8 inches and the inner circle diameter 1-1/4 of an inch. In the space between the circles at the top shall be the words "State of New Hampshire" and at the bottom "Professional Geologist." In the space inside the inner circle shall be the full name of the licensee above an image of a crossed geological hammer and compass. The license number shall be written so as to span the image. The word "Licensed" shall be written at the bottom following the curve of the inner circle, above the words "Professional Geologist."(c) No licensee shall stamp or seal any documents with his or her seal after his or her license has expired or been revoked, or while it is suspended. No licensee shall stamp or seal any document that the licensee has not prepared personally or that the licensee did not directly supervise the creation thereof.N.H. Admin. Code § Geo 307.03
#7526, eff 7-1-01; ss by #9439, eff 3-25-09
Amended by Volume XXXVII Number 15, Filed April 13, 2017, Proposed by #12152, Effective 3/24/2017, Expires 3/24/2027.