Section Env-Wq 810.02 - Label Requirements for Class A Biosolids(a) The generator of class A biosolids shall submit a proposed label to the department with the application for a sludge quality certification and annually with the annual report required under Env-Wq 809.09.(b) The proposed label shall include the following:(1) The name, address, and telephone number of the generator;(2) A brief description of the product, including the process employed to treat or stabilize the biosolids;(3) Recommended uses and appropriate application rates;(4) Average nutrient analysis of the final biosolids product for nitrogen, phosphorus, and potassium based upon the analytical results required under Env-Wq 809.03(c) from the previous year;(5) Average metals concentration for the 10 metals listed in Env-Wq 809.03(c) based upon the analytical results required under Env-Wq 809.07(a) from the previous year;(6) A statement detailing the requirements set forth in Env-Wq 810.01; and(7) The following statement:(8) "Any use of biosolids contrary to label recommendations is a violation of NH law."(c) The department shall approve the label if it determines that the information in the proposed label is complete and correct.(d) Within 30 days of receipt of the label, the department shall notify the generator in writing of its approval or disapproval of the label. If the department does not approve the label, the written notification shall specify the reason(s) for the decision.N.H. Admin. Code § Env-Wq 810.02
(See Revision Note at chapter heading for Env-Wq 800) #8887, eff 5-23-07
Amended by Volume XXXVI Number 01, Filed January 7, 2016, Proposed by #10998, Effective 1/1/2016, Expires 1/1/2026.