N.H. Admin. Code § Env-Wq 703.01

Current through Register No. 50, December 12, 2024

Section Env-Wq 703.01 - Submittal of Design Drawings, Technical Specifications, and Supporting Documentation

(a) The owner shall submit design drawings, technical specifications, and supporting documentation for proposed new or modified publicly or privately owned sewerage and WWTPs to the department for approval in accordance with this part.

(b) The owner shall submit design drawings, technical specifications, and supporting documentation for any proposed sewer that serves more than one building or that requires a manhole at the connection, and for any proposed sewage pumping station that serves more than one building or has a capacity in excess of 50 gallons per minute (gpm).

(c) All design drawings, technical specifications, and supporting documentation submitted to the department for review and approval shall be:

(1) Prepared or reviewed by an engineer licensed in the state of New Hampshire pursuant to RSA 310-A; and

(2) Stamped and signed by the engineer who prepared or reviewed them.

(d) The owner shall submit the following number of sets of plans, design drawings, technical specifications, and supporting documentation:

(1) For state- or federally-funded projects:

a.For initial review, 2 printed sets; and

b.For final review and approval, one complete printed set, 2 additional printed copies of the cover sheet, and 2 electronic sets submitted on 2 separate compact disks or DVDs; and

(2) For other projects:

a.For initial review, one printed set; and

b.For final review, one complete printed set, 2 additional printed copies of the cover sheet, and 2 electronic sets submitted on 2 separate compact disks or DVDs.

N.H. Admin. Code § Env-Wq 703.01

(See Revision Note at chapter heading for Env-Wq 700) #8590, eff 3-25-06

Amended byVolume XXXIV Number 46, Filed November 13, 2014, Proposed by #10693, Effective 10/15/2014, Expires10/15/2024.