Section Env-Wq 2101.11 - Service Meters, Distribution Meters, and Transfer Meters The owner shall:
(a) Install water meters for each of the following:(1) All service connections, including all public sector service connections;(2) Transfers to consecutive water systems or PORSs; and(3) If a water source undergoes a treatment process that consumes water: a. Each point of entry into the distribution system, including points of entry for non-domestic purposes, such as but not limited to irrigation; orb. All points of discharge to other than the distribution system, including but not limited to backflush, treatment process water, and continuous analyzers;(b) Select, size, install, test, and maintain the water meters required by (a) above in accordance with: (1) The specifications of the manufacturer; and(2) The procedures and protocols described in "Manual of Water Supply Practices, Water Meters - Selection, Installation, Testing, and Maintenance," document identification number AWWA M6, American Water Works Association, 2012, available as noted in Appendix B;(c) Maintain a log of meter information, including the meter make, meter model, meter size, date of meter installation or meter age, dates of meter testing, meter test results, and dates of meter calibration;(d) Submit the records of the meter testing and maintenance as required by (b) above for the meters specified in (a) above to the department with the report specified in Env-Wq 2101.27;(e) Read the water meters required by (a)(1) above at least quarterly; and(f) Read the water meters required by (a)(2) and (3) above at least monthly.N.H. Admin. Code § Env-Wq 2101.11
#8353, eff 5-14-05 (See Revision Note at part heading for Env-Wq 2101) (formerly Env-Ws 390.11); ss by #10480-A, eff 12-3-13
Amended by Number 28, Filed July 11, 2024, Proposed by #14004, Effective 6/22/2024, Expires 6/22/2034.