Current through Register No. 44, October 31, 2024
Section Env-Wq 1613.03 - Criteria for ReviewThe department shall issue an EQ certification to the applicant if it determines that the information submitted demonstrates that the solids and filtrate:
(a) Is not a hazardous waste as defined in RSA 147-A:2, VII;(b) Consistently meets the EQ pathogen and vector attraction requirements specified in the application;(c) For solids, does not exceed the following concentrations, expressed as the total concentration on a dry weight basis: (1) For arsenic, 32 mg/kg;(2) For cadmium, 14 mg/kg;(3) For chromium, 1000 mg/kg;(4) For copper, 1500 mg/kg;(6) For mercury, 10 mg/kg;(7) For molybdenum, 35 mg/kg;(8) For nickel, 200 mg/kg;(9) For selenium, 28 mg/kg; and(10) For zinc, 2500 mg/kg;(d) For filtrate, does not exceed the following concentrations: (1) For arsenic, 0.4 mg/l;(2) For cadmium, 0.2 mg/l;(3) For chromium, 12.0 mg/l;(4) For copper, 12.0 mg/l;(6) For mercury, 0.2 mg/l;(7) For molybdenum, 0.7 mg/l;(8) For nickel, 4.0 mg/l;(9) For selenium, 4.0 mg/l;(10) For zinc, 20.0 mg/l; and(11) For nitrate, 10.0 mg/l; and(e) Is of sufficiently consistent quality such that for the constituents in (c) and (d) above, the mean concentration for data submitted under Env-Wq 1613.01(e) plus one standard deviation from the mean does not exceed 1.5 times the concentration specified in (c) or (d) above.N.H. Admin. Code § Env-Wq 1613.03
#8458, eff 10-27-05 (see Revision Note at chapter heading); ss by #10466, eff 11-26-13