N.H. Code Admin. R. Env-Wq 1611.08

Current through Register No. 25, June 20, 2024

Section Env-Wq 1611.08 - Facility Plan

The plan required under Env-Wq 1611.02(c)(2) shall:

(a) Be at a scale appropriate to show all information contained on the plan clearly; and

(b) Show the following:

(1) A locus map which identifies the proposed site or facility location and details the proposed route of access to and onto the site;

(2) The total available land area, in acres, and the specific acres to be used for I/A operations, including proposed stockpile, holding or storage tank locations;

(3) All access roads and access control measures, including perimeter fencing and setback zones;

(4) All roads, property lines, structures whether on or off the property, and all easements or rights-of-way which exist on the property;

(5) All proposed measures to control surface runoff to or from the site or facility and stockpile locations, if applicable;

(6) All surrounding land use within 600 feet of the site or facility footprint;

(7) All soil test pit locations;

(8) The approximate location of and distance to all dwellings, structures, and water supply wells within 300 feet of the I/A site or facility;

(9) The names and mailing addresses of all abutters;

(10) The name and location of all surface waters within1/4 mile of the site or facility, including their designated river classification, under RSA 483, New Hampshire rivers management and protection program, if applicable;

(11) The scale of the plan;

(12) An arrow indicating which direction on the plan is north;

(13) The location of all poorly and very poorly drained soils; and

(14) If applicable, the location of the groundwater discharge or monitoring zone as described in Env-Wq 1615.02.

N.H. Code Admin. R. Env-Wq 1611.08

#8458, eff 10-27-05 (see Revision Note at chapter heading); ss by #10466, eff 11-26-13