Section Env-Sw 901.06 - Transportation, Packaging and Labeling Requirements(a) Prior to storage, transportation or disposal, asbestos waste shall be packaged and labeled in accordance with state rules and federal regulation, including as applicable, 40 CFR 61, 29 CFR 1910, 29 CFR 1926, Env-A 1800 and this section.(b) Prior to being packaged, asbestos waste that is friable or exhibits friable characteristics shall be treated in accordance with Env-Sw 901.03.(c) Bags used for disposal of friable asbestos waste shall be made of at least 6 mil polyethylene or a functional equivalent.(d) Bags identified in (c) above shall not be reused.(e) Containers receiving bulk unwrapped asbestos waste shall be lined with at least 20 mil polyethylene or its functional equivalent.(f) The liner material identified in (e) above shall not be reused.(g) A waste shipment record shall accompany all asbestos waste when transported, pursuant to the provisions of 40 CFR 61.(h) Asbestos waste transporters shall comply with United States Department of Transportation regulations and New Hampshire department of safety rules, as applicable.(i) Asbestos waste transporters shall notify the receiving landfill prior to delivering a shipment of asbestos waste, so as to provide the landfill operator with the opportunity to properly prepare the disposal area pursuant to Env-Sw 901.04.N.H. Admin. Code § Env-Sw 901.06
#5172, eff 7-1-91; ss by #6535, INTERIM, eff 7-1-97, EXPIRES: 10-29-97; ss by #6619-B, eff 10-29-97; (See Revision Note at chapter heading for Env-Sw 900) ss by #8459, eff 10-28-05 (formerly Env-Wm 2601.06 )
Amended byVolume XXXIV Number 24, Filed June 12, 2014, Proposed by #10598, Effective 7/1/2014, Expires7/1/2024.