Section Env-Dw 505.06 - Cross-Connection Permits(a) The owner of any premises where a cross-connection exists shall apply for a cross-connection permit on the forms provided by the supplier if the premises are served by a PWS that is required to have a cross-connection program pursuant to Env-Dw 505.02(a).(b) All permits shall be: (1) Issued by the supplier for a term not to exceed 5 years; and(2) Subject to revocation by the supplier.(c) Each permit shall identify: (1) The owner's name, mailing address, and daytime telephone number;(2) The location of the backflow prevention device;(3) The name of the manufacturer of the backflow prevention device;(4) The size and model number of the backflow prevention device;(5) A description of contaminants that could be introduced through the cross-connection;(6) The frequency of inspections and testing of the backflow prevention device; and(d) The holder of a cross-connection permit shall apply for the permit to be renewed every 5 years or: (1) Whenever a change has occurred in the existing degree of hazard classification; or(2) A change has been made in the type of backflow prevention device installed.(e) Cross-connection permits shall be non-transferable.N.H. Code Admin. R. Env-Dw 505.06
(See Revision Note at part heading for Env-Dw 505) #10615, eff 6-1-14