Appendix B - Relevant Statutes 485-A:4 Duties of Department. - It shall be the duty of the department and the department is authorized:
...
XIII.To establish rules governing the prequalification of consulting engineers employed in the planning and construction of public water supply and pollution control projects. Any licensed engineering firm seeking initial prequalification shall pay to the department a fee of $200. Prequalification shall be renewed annually and shall be accompanied by a $50 renewal fee. These fees shall be deposited with the state treasurer as unrestricted revenue. The department is further empowered to prescribe the contract award procedures to be followed in the awarding of construction contracts involving state financial assistance.310-A:12 General Requirements for Licensure as an Engineer. -
I.Applicants who have the minimum of a bachelor of science degree, or the equivalent, from an Accreditation Board for Engineering and Technology (ABET) or other accredited 4-year institution in an engineering curriculum, certification as an "engineer-in-training'' as a result of a NCEES fundamentals of engineering proctored examination and 4 years of accumulated engineering experience under the direction of a licensed professional engineer and satisfactory to the board may apply to sit for the professional engineers examination.II.Applicants who have the minimum of a bachelor of science degree, or the equivalent, from an ABET or other accredited 4-year institution in an engineering curriculum and more than 10 years of accumulated engineering experience under the direction of a licensed professional engineer and satisfactory to the board may apply to sit for the professional engineers examination. Such an applicant may request a waiver of the fundamentals of engineering examination.III.Applicants with a minimum of 25 years of engineering experience of which at least 10 years shall have been in responsible charge of engineering work satisfactory to the board may apply for licensure under this section on the basis of education and experience, provided that they have successfully passed the professional engineers examination required by RSA 310-A:17.IV.Whenever the evidence presented in an application under paragraph I, II, or III does not appear to the board conclusive and warranting the issuance of a license, the applicant shall be required to pass a proctored examination, as the board may determine. 310-A:18 Certificates; Seals. - The board shall issue a license, upon payment of the registration fee established by the board, to any applicant who, in the opinion of the board, has satisfactorily met all the requirements of this subdivision. Licenses shall show the full name of the licensee, have a serial number, and be signed by the chairperson and the secretary of the board under seal of the board. The issuance of a license by the board shall be prima facie evidence that the person named in the license is entitled to all the rights and privileges of a licensed professional engineer while the license remains valid. Each licensee shall upon licensure obtain a seal of the design authorized by the board, bearing the registrant's name and the legend, "Licensed Professional Engineer.'' All papers or documents involving the practice of engineering under this subdivision, when issued or filed for public record, shall be dated and bear the signature and seal of the licensed professional engineer who prepared or had responsibility for and approved them. It shall be a class B misdemeanor for the licensee to stamp or seal any documents with such seal after the license of the licensee has expired or has been revoked, unless such license shall have been renewed or reissued.
310-A:19 Interstate Licensure; Temporary Permit. -
I.Applicants who are licensed or registered in another state, provided the other state's licensing requirements are substantially equivalent to or higher than those of this state, may apply to the board for licensure.II.Applicants who are certified by the National Council of Engineering Examiners (NCEE) may apply for licensure by having their NCEE record sent to the board and by furnishing such other information on a standard application form as the board may direct.III.A person not a resident of and having no established place of business in this state who wishes to practice or to offer to practice engineering in this state may make application to the board for a temporary permit. A temporary permit shall be limited to practice on a specific project in this state for a period not to exceed 6 months in any one calendar year, provided such person is a licensed professional engineer in a state or country where the requirements and qualifications for obtaining a certificate of licensure are substantially equivalent to or higher than those specified in this subdivision.310-A:20 Engineering Certificates for Business Organizations. -
I.The practice of or offer to practice professional engineering for others by individual engineers licensed under this subdivision through a business organization as officers, partners, associates, employees, or agents is permitted, subject to the provisions of this subdivision; provided that: (a) One or more of the corporate officers, of a corporation or one or more general partners, or associates is designated as being responsible for the engineering activities and engineering decisions of the business organization, and is a licensed engineer under this subdivision.(b) All personnel of the business organization who act in its behalf as professional engineers are licensed under this subdivision.(c) The business organization has been issued a certificate of authorization by the board, as provided in this section.II.The requirements of this subdivision shall not affect a business organization or its employees in performing services for such business organization or its subsidiary or affiliated business organizations. All final drawings, specifications, plans, reports, or other engineering papers or documents involving the practice of engineering, when issued or filed for public record, shall be dated, and bear the signature and seal of the professional engineer who prepared them or under whose direct supervisory control they were prepared.III.A business organization desiring a certificate of authorization shall file with the board an application, using a form provided by the board, listing the names and addresses of all officers and board members, general and limited partners, associates, and any individuals duly licensed to practice engineering in this state who shall be in responsible charge of the practice of engineering in this state through the business organization, and any other information required by the board. The same form, giving the same information, must accompany the annual renewal fee. If there is a change in any of these persons during the year, such change shall be designated on the same form and filed with the board within 30 days after the effective date of such change. If all requirements of this section are met, the board shall issue a certificate of authorization to such business organization, and such business organization shall be authorized to contract for and to collect fees for furnishing engineering services.IV.No business organization shall be relieved of responsibility for the conduct or acts of its agents, employees, officers, or partners, by reason of its compliance with the provisions of this section, nor shall any individual practicing engineering be relieved of responsibility for engineering services performed by reason of such individual's employment by or relationship with such business organization. V.The secretary of state shall not issue a certificate of incorporation to an applicant for incorporation or for registration as a foreign business organization which includes the words "Engineer'' or "Engineering'' or any modification or derivative thereof in its corporate or business name or which includes the practice of engineering among the objects for which it is established unless the board shall have issued, with respect to such applicant, a certificate of authorization or eligibility for authorization, a copy of which shall have been presented to the secretary of state. Similarly, the secretary of state, after a reasonable transition period, shall decline to register any trade name or service mark which includes such words or modifications or derivatives thereof in its firm or business name except to partnerships, sole proprietorships and associations holding certificates of registration or authorization issued under the provisions of this subdivision, a copy of which shall likewise have been presented to the secretary of state. However, the requirements of this subdivision shall not apply to any business formed and registered with the secretary of state prior to January 1, 1999, which uses the words "Engineer'' or "Engineering'' or any modification or derivative thereof in its corporate or business name, and which does not perform or require the services of a professional engineer.VI.A professional engineer who renders occasional, part-time or consulting engineering services to or for a business organization may not, for the purposes of this subdivision, be designated as being responsible for the engineering activities and decisions of such business organization.N.H. Code Admin. R. Env app B