Section Env-A 810.02 - Information Regarding Additional Monitoring(a) Except as specified in (c) below, the owner or operator of a source that is required to submit an application for a temporary permit, state permit to operate, or title V operating permit as specified in Env-A 607.03, Env-A 608.03, or Env-A 609.06, respectively, shall include with the application a description of any other monitoring that: (1) The source intends to follow in order to demonstrate compliance with any applicable state or federal statute, rule, regulation, or permit; and(2) Is not otherwise described by the information submitted pursuant to Env-A 810.01.(b) The description of the monitoring shall include the following: (1) The device or process parameter(s) monitored;(2) The frequency of monitoring;(3) The normal range for each parameter monitored, and range during startup or shutdown conditions, if different;(4) A description of any data recording or recordkeeping, parameter setpoints and alarms, and corresponding operator responses to malfunctions of the monitoring device or source of emissions;(5) The manufacturer's recommended procedures for operation;(6) The manufacturer's recommended schedule for service and maintenance of the monitoring device; and(7) Any additional information needed to completely describe the nature, timing, and purpose of the monitoring.(c) If a description of additional monitoring, as required by (a) above, has been submitted previously with an application for a permit and there has been no change to the additional monitoring since the initial submission, the owner or operator may state in writing that there has been no such change in lieu of the requirement to submit a description of additional monitoring with a subsequent permit application.N.H. Code Admin. R. Env-A 810.02
Amended by Volume XXXIX Number 19, Filed May 9, 2019, Proposed by #12762, Effective 5/1/2019, Expires 5/1/2029.