Section Env-A 3305.01 - General Operator Training and Certification For Large and Small MWC Units(a) In accordance with RSA 149-M:6II, XI and 40 CFR § 60.54b for large MWC units, and 40 CFR § 60.1645 and § 60.1675 for small MWC units, operator training and certification for large and small MWC units shall be obtained through the state program specified in Env-Sw 1600, Solid Waste Facility Operator Training and Certification.(b) The following employees of a large or small MWC unit shall complete the operator certification requirements specified in (a), above: (1) Chief facility operators;(2) Shift supervisors; and(3) Control room operators.(c) An employee specified in (b), above, shall obtain operator certification as specified in (a), above, no later than 6 months after the employee transfers to or is hired to work at the MWC unit.(d) To maintain certification, the trained and certified MWC operator shall complete an annual review or refresher course that meets the requirements specified in Env-Sw 1600, currently Env-Sw 1611.(e) If all certified operators must be temporarily offsite, the MWC unit owner or operator shall comply with the requirements of 40 CFR § 60.54b(c) for a large MWC unit or 40 CFR § 60.1685 for a small MWC unit.N.H. Code Admin. R. Env-A 3305.01
#6518-B, eff 5-29-97; ss by #7704, eff 6-7-02; ss by #9084, eff 2-2-08
Amended by Volume XXXVI Number 28, Filed July 14, 2016, Proposed by #11131, Effective 7/18/2016, Expires 7/18/2026.Amended by Volume XXXVIII Number 41, Filed October 11, 2018, Proposed by #12628, Effective 9/27/2018, Expires 9/27/2028.