Section Env-A 1805.08 - ACM Disposal Procedures(a) After completing abatement work, the O/O or homeowner shall: (1) Package and label RACM as specified in 40 CFR 61.150(a)(1)(iii)-(v), as applicable, and package and label ACM that is not RACM as specified in (c), below;(2) Except as provided in (b), below, remove packaged ACM, whether RACM or not, from the work site as soon as practicable, but in no event longer than 30 days following the completion of the abatement work; and(3) Transport and dispose of the ACM, whether RACM or not, as specified in 40 CFR 61.150, specifically including 40 CFR 61.150(d), as incorporated by reference with amendments in Env-A 1808.01 and Env-Sw 901.04.(b) The O/O of an asbestos abatement project conducted under an annual notification filed pursuant to Env-A 1804.04 shall be exempt from the time limit specified in (a)(1), above, provided the O/O: (1) Manages the ACM, whether RACM or not, in accordance with Env-Sw 901; and(2) Removes the ACM, whether RACM or not, from the facility no later than 30 days after facility closure.(c) Prior to delivering ACM that is not RACM to a transporter for disposal, the O/O or homeowner shall: (1) Adequately wet all loose ACM to prevent the release of fibers and place it into water-tight containers or double impermeable bags of at least 6 mil thickness each and seal the containers or bags, as applicable; and(2) Wrap large components or structural members that were removed intact air-tight in 2 layers of 6 mil sheeting and seal the sheeting.(d) Within 30 days after delivery of ACM to the disposal site, the O/O or homeowner shall provide a copy of the waste shipment record to the department.N.H. Admin. Code § Env-A 1805.08
(See Revision Note at chapter heading for Env-A 1800) #9298, eff 10-21-08
Amended byVolume XXXIV Number 46, Filed November 13, 2014, Proposed by #10695, Effective 10/18/2014, Expires10/18/2024.Amended by Volume XXXVII Number 19, Filed May 11, 2017, Proposed by #12172, Effective 5/5/2017, Expires 5/5/2027.