N.H. Admin. Code § Env-A 1220.02

Current through Register No. 50, December 12, 2024

Section Env-A 1220.02 - Compliance Standards for Miscellaneous Industrial Adhesives

(a) Except as provided in (d) or (e), below, and Env-A 1220.03, those processes using general or specialty adhesive applications or adhesive primer applications shall control VOC emissions by using adhesives that meet the limits specified in Table 1220-1, below, subject to (b) and (c), below:

Table 1220-1 VOC Content Limits for Adhesive and Adhesive Primer Application Processes

Type of Adhesive Application Process	VOC Emission Limit
Type of Adhesive Application Process	(g/l)	(lb/gal)
General
Reinforced plastic composite	200	1.7
Flexible vinyl	250	2.1
Metal	30	0.3
Porous material (except wood)	120	1.0
Rubber	250	2.1
Wood	30	0.3
Other substrates	250	2.1
Specialty	-
Ceramic tile installation	130	1.1
Contact bond adhesive	250	2.1
Cove base installation	150	1.3
Floor covering installation (Indoor)	150	1.3
Floor covering installation (Outdoor)	250	2.1
Perimeter-bonded sheet vinyl flooring installation	660	5.5
Metal to urethane/rubber molding or casting	850	7.1
Motor vehicle adhesive	250	2.1
Motor vehicle weatherstrip adhesive	750	6.3
Multipurpose construction	200	1.7
Plastic solvent welding (ABS)	400	3.3
Plastic solvent welding (Except ABS)	500	4.2
Sheet rubber lining installation	850	7.1
Single-ply roof membrane installation/repair (except EPDM)	250	2.1
Structural glazing	100	0.8
Thin metal laminating	780	6.5
Tire repair	100	0.8
Waterproof resorcinol glue	170	1.4
Adhesive Primer	-
Motor vehicle glass bonding primer	900	7.5
Plastic solvent welding adhesive primer	650	5.4
Single-ply roof membrane adhesive primer	250	2.1
Other adhesive primer	250	2.1

(b) "VOC emission limit" means the mass of VOC per volume of adhesive or adhesive primer, excluding water and exempt compounds, as applied.

(c) If an adhesive is used to bond dissimilar substrates together, then the applicable substrate category with the least stringent VOC emission limit shall be the limit for such application.

(d) To meet the limits in Table 1220-1, above, a source may combine low-VOC content adhesives, the application methods specified in Env-A 1220.04, and add-on control equipment.

(e) As an alternative to the VOC emission limits Table 1220-1, above, a source shall achieve an overall control efficiency of at least 85%.

N.H. Admin. Code § Env-A 1220.02

(See Revision Note at chapter heading for Env-A 1200) #9933, eff 6-1-11

Amended by Volume XXXIX Number 46, Filed November 14, 2019, Proposed by #12899, Effective 10/17/2019, Expires 10/17/2029