Section Env-A 1219.06 - Emission Rates for Filled Resins(a) When using a filled production resin or filled tooling resin, the owner or operator shall calculate the emission rate for the filled material on an as-applied basis using the following formula: (1) "PVF" means the as-applied monomer VOC emission rate for the filled production resin or tooling resin, kilograms monomer VOC per megagram of filled material;(2) "PVU" means the monomer VOC emission rate for the neat or unfilled resin, before filler is added, as calculated using the formulas in Table 1219-2;(3) "% filler" means the weight-percent of filler in the as-applied filled resin system; and(4) PVF shall be equal to 100 minus the weight-percent of filler, divided by 100, the entire quantity multiplied by PVU, as in the following equation: Click here to view image
(b) If the filled resin is used as a production resin, the value of PVF calculated by the equation in (a), above, shall not exceed 46 kilograms of monomer VOC per megagram of filled resin applied.(c) If the filled resin is used as a tooling resin, the value of PVF calculated by the equation in (a), above, shall not exceed 54 kilograms of monomer VOC per megagram of filled resin applied.(d) If the facility is including a filled resin in the emissions averaging procedure specified in Env-A 1219.03, the facility shall use the value of PVF calculated using the equation in (a), above, for the value of PVi in the equation specified in Env-A 1219.03(c)(4).N.H. Code Admin. R. Env-A 1219.06
(See Revision Note at chapter heading for Env-A 1200) #9933, eff 6-1-11
Amended by Volume XXXIX Number 46, Filed November 14, 2019, Proposed by #12899, Effective 10/17/2019, Expires 10/17/2029