Section Env-A 1213.10 - Alternatives to Requirements for Wood Furniture, Wood Burial Casket, and Gunstock Coating and Finishing Operations As an alternative to the applicable emission rate limits, technological controls, operation and maintenance controls, and work practice standards specified in Env-A 1213.02 through Env-A 1213.09, as applicable, wood furniture, wood burial casket, or gunstock coating and finishing operations meeting the applicability criteria of Env-A 1213.01 may implement one or more of the following methods:
(a) Install and use an add-on control system that results in emissions to the atmosphere that do not numerically exceed the applicable VOC content limits, validated by the procedure described in Env-A 1213.11;(b) Meet either a coatings-based or solids-based modified emission rate or VOC content limit as approved by the director and EPA in accordance with the RACT order provisions in Env-A 1205.03 through Env-A 1205.06 in the event that the source owner or operator demonstrates that, because of technological or economic reasons, the source owner or operator cannot meet one or more of the following: (1) The applicable specified emission rate limit(s) in Env-A 1213.02 or Env-A 1213.03; or(2) The applicable VOC content limit prescribed in Env-A 1213.04(a); or(c) Comply with one or more modified control techniques approved by the director and EPA in accordance with the RACT order provisions in Env-A 1205.03 and Env-A 1205.06 in the event that the source owner or operator demonstrates that the applicable specified control technique in Env-A 1213.04(b), Env-A 1213.05, Env-A 1213.06, Env-A 1213.07, Env-A 1213.08, or Env-A 1213.09 cannot be met because of technological or economic reasons.N.H. Code Admin. R. Env-A 1213.10
(See Revision Note at chapter heading for Env-A 1200) #9933, eff 6-1-11
Amended by Volume XXXIX Number 46, Filed November 14, 2019, Proposed by #12899, Effective 10/17/2019, Expires 10/17/2029