Section Env-A 1206.02 - Compliance Standards for Coating of Metal Cans A metal can coating source shall be limited at all times to the emission rates specified below:
(a) For use in interior or exterior sheet base-coating or over-varnish, or a 2-piece can exterior base coat or over-varnish, 0.34 kg VOC/l, equivalent to 2.8 lb VOC/gallon, of coating as applied, excluding water and exempt compounds or, for a source implementing add-on controls or a bubble to achieve compliance, the solids-based emission rate determined by the procedure described in Env-A 1205.01(d);(b) For use in a 2-piece or 3-piece can interior body spray coating, or a 2-piece can exterior end spray or roll coating, 0.51 kg VOC/l, equivalent to 4.2 lb VOC/gallon, of coating, as applied, excluding water and exempt compounds;(c) For use in 3-piece can side-seam spray operations, 0.66 kg VOC/l, equivalent to 5.5 lb VOC/gallon, of coating, as applied, excluding water and exempt compounds; or(d) For use in end sealing compound operations, 0.44 kg VOC/l, equivalent to 3.7 lb VOC/gallon, of coating, as applied, excluding water and exempt compounds.N.H. Code Admin. R. Env-A 1206.02
(See Revision Note at chapter heading for Env-A 1200) #9933, eff 6-1-11
Amended by Volume XXXIX Number 46, Filed November 14, 2019, Proposed by #12899, Effective 10/17/2019, Expires 10/17/2029